Carbon fiber products need a lot of manpower in the production process, which is why the price of carbon fiber products is relatively expensive. The reason why that carbon fiber product can be used well has a great relationship with the performance of carbon fiber products, that is, the performance of carbon fiber products, that is, the quality of carbon fiber products is light, high strength, corrosion resistance and other advantages. So, in the production of carbon fiber products, there are three factors that will affect the performance of carbon fiber products.
That is, in the production process of carbon fiber products, it is generally communicated with product size, determine the final size and required performance, then select and design raw materials, then cut and lay the layer required by size, then carry out rough embryo production according to the forming process, then carry out a series of packaging processes, and then carry out a series of packaging processes.
1. selection of prepreg materials
The properties of carbon fiber produced will be different with the different prepreg. The quality of carbon fiber prepreg will directly affect the final performance of carbon fiber products, such as the problems of the raw silk in the carbon fiber prepreg, or the poor resin impregnation, will affect the performance of the final product. For example, the overall strength, shear strength, etc.
2. prepreg layer
In the whole product production, that is the preliminary work of carbon fiber prepreg layer. After we have made the pre-dip material selection, we need to carry out prepreg laying after we have mould according to the product size. The laying layer will have a great relationship with the final performance of the product, so we should select the prepreg according to the product size. The general layer is 45 °、 0 °、 ninety ° Such a way of laying, then the final way of laying depends on the stress of the product to design. In the production process of carbon fiber products mentioned above, our design is the same.
3. modeling mode
The best molding method will be adopted in different products, but each molding method can produce products. Then different molding process will lead to poor final performance of the products. For example, the hot pressing tank forming process will meet the high performance requirements for carbon fiber products. For example, the military box will also adopt the forming process of hot pressing tank. So most carbon fiber products, the performance can be fully met, will be used molding process, because the molding method is different, but also involves the actual production cost.
When carbon fiber products are formed, according to the different process of the products, there will be differences in performance. The three factors are these three aspects. Carbon fiber products have the advantages of good and easy to process, which can give us more design space, and will have more performance under different use, such as friction resistance, fatigue resistance, high temperature resistance and other aspects, and become a representative of new high-performance products.
